Allied Telesis AT-GS950/24 - Manual (Page 134)

Chapter 10: MAC Address Table
134
Modify Static Unicast Address
To modify the port assignment of a unicast MAC address in the MAC
address table, perform the following procedure:
1. From the main menu on the left side of the page, select the Bridge
folder.
2. From the Bridge folder, select Static Unicast.
The Static Unicast Address Table Page is displayed. See Figure 43 on
page 132.
3. Select Modify next to the static unicast MAC address that you want to
change.
The Modify Static Unicast Address Page is displayed. See Figure 45.
Figure 45. Modify Static Unicast Address Page
4. In the Port Member row, click the radio button for the port that you
want to include or remove in the Port Member area. The selected port
is indicated with an active radio button.
Note
To restore the original group member ports, click Restore.
5. Click Apply.
6. From the main menu on the left side of the page, select Save Settings
to Flash to permanently save your changes.