Allied Telesis AT-GS950/24 - Manual (Page 140)

Chapter 10: MAC Address Table
140
Delete Static Multicast Address
To delete a multicast MAC address from the MAC address table, perform
the following procedure:
1. From the main menu on the left side of the page, select the Bridge
folder.
2. From the Bridge folder, select Static Multicast.
The Static Multicast Address Table Page is displayed. See Figure 47
on page 137.
3. Select Delete next to the static multicast address that you want to
remove.
The static multicast address is removed from the Static Multicast
Address Table Page.
To delete all 802.1q address entries, click the Delete All button above
the 802.1Q VLAN table.
To delete all port-based VLAN address entries, click the Delete All
button above Port-Based VLAN table.
4. From the main menu on the left side of the page, select Save Settings
to Flash to permanently save your changes.