Allied Telesis AT-GS950/24 - Manual (Page 232)

Chapter 17: SNMPv3
232
3. Enter the Group Name.
Note
This entry must be pre-defined on the SNMP User/Group page.
Refer to “Creating SNMPv3 View Names” on page 231.
4. Enter the Read View Name.
This name is an optional field. It can be up to 32 characters in length.
5. Enter the Write View Name.
This name is an optional field. It can be up to 32 characters in length.
6. Enter the Notify View Name.
This name is an optional field. It can be up to 32 characters in length.
7. From the Security Model pull-down menu, select v3.
8. Enter the Security Level from the pull-down menu. The selection
options are:
NoAuthNoPriv: This selection is appropriate when no Auth-
Protocol or Priv-Protocol (no encryption) are selected on the
SNMP User/Group page.
AuthNoPriv: Choose this selection when encryption has been
enabled, but only the Auth-Protocol has a password assigned,
and the Priv-Protocol has been selected as none on the SNMP
User/Group page.
AuthPriv: When both the Auth-Protocol or Priv-Protocol have
been enabled, choose this selection.
9. Click the Add button.
See Figure 87 on page 233 for an example.