Allied Telesis AT-GS950/24 - Manual (Page 188)

Chapter 14: GVRP
188
Port Settings
Perform the following procedure to configure the GVRP port settings:
1. From the main menu on the left side of the page, select Bridge.
The Bridge folder expands.
2. From the Bridge folder, select GVRP.
The GVRP folder expands.
3. From the GVRP folder, select Port Settings.
The AT-GS950/24 Port Settings Page is displayed. See Figure 69 for a
partial view of this page.
Figure 69. GVRP Port Settings Page
4. The following fields are listed for each port:
Port - This parameter displays the ports on the switch.
Dynamic Vlan Status - This parameter defines the GVRP status
of the port. From the Dynamic Vlan Status field, select one of the
following choices from the pull-down menu:
Ignore - This parameter indicates that the setting in the All row
does not apply to the Dynamic Vlan Status field. In other
words, each port is set individually.
Enabled - The Dynamic Vlan is activated for the port row
selected.
Disabled - The Dynamic Vlan is de-activated for the port row
selected.
Restricted VLAN Registration - This parameter controls if the
VLAN registration on the port is restricted or not.