Allied Telesis AT-GS950/24 - Manual (Page 303)

AT-GS950/24 Web Interface User Guide
303
General Configuration
You can enable DHCP Snooping and configure DHCP Snooping general
settings on the switch by following the procedures in these sections:
 "Enabling DHCP Snooping"
 “Configuring DHCP Snooping General Settings” on page 304
Enabling DHCP
Snooping
The following procedure describes how to enable or disable the DHCP
Snooping feature on the AT-GS950/24 switch:
1. From the main menu on the left side of the page, select DHCP
Snooping.
The DHCP Snooping folder expands.
2. From the DHCP Snooping folder, select General Settings.
The General Settings page is displayed. See Figure 121.
Figure 121. General Settings Page
3. In the DHCP Snooping field, select one of the following radio button
choices:
Enabled - This parameter activates the General Settings menus.
Disabled - This parameter de-activates General Settings menus.
4. Click Apply.
If you are configuring the general settings, skip to “Configuring
DHCP Snooping General Settings” on page 304.
If you want to enable or disable DHCP Snooping on the switch
without configuring the general settings, proceed to Step 5.