Allied Telesis AT-GS950/24 - Manual (Page 292)

Chapter 21: Security
292
Dial-in User— Local Authentication
The Dial-in User feature provides the local authentication server for port
security when a remote (RADIUS) or TACACS+ server is not available.
This section includes the following:
 “Dial-In User Overview”
 “Dial-in User Configuration”
Note
To permanently save your new settings or any changes to the
configuration file, select Save Settings to Flash from the main
menu on the left side of the page.
Dial-In User
Overview
The Dial-in User (local) authentication method allows you to set up 802.1x
authentication parameters internally in the switch. In this case, the user
name and password combinations are entered with an optional VLAN
when they are defined. Based on these entries, the authentication process
of a supplicant is done locally by the AT-S115 Management software
using a standard EAPOL (EAP over LAN) transaction.
Dial-in User
Configuration
The procedures in this section describe how to create, delete, and modify
dial-in users. See the following procedures:
 “Add a Dial-in User”
 “Modify a Dial-in User” on page 294
 “Delete a Dial-in User” on page 294
Add a Dial-in User
To set up a user’s dial-in access, do the following:
1. From the main menu on the left side of the page, select the Security
folder.
The Security folder expands.
2. From the Security folder, select Dial-in User.
The Dial-in User page is displayed. See Figure 117 on page 293.