Allied Telesis AT-GS950/24 - Manual (Page 235)

AT-GS950/24 Web Interface User Guide
235
5. Enter “1” for the OID Mask.
6. Enter the View Type. Choose from the following:
Included: This selection allows the specified MIB object to be
included in the view.
Excluded: This selection blocks the view of the specified MIB
object.
7. Click the Add button.
The updated view is displayed in the View Table. See Figure 89.
Figure 89. SNMP View Table Page Example
8. From the main menu on the left side of the page, select Save Settings
to Flash to permanently save your changes.
Modifying
SNMPv3 View
Table Entries
If you need to modify an entry in the View Table page, you must first delete
the entry and then re-enter it. For information about how to delete an entry
in this table, see “Deleting SNMPv3 View Table Entries”. For information
about how to create a new entry in this table, see “Creating SNMPv3 View
Table Entries” on page 234.
Deleting SNMPv3
View Table
Entries
1. From the main menu on the left side of the page, select the SNMP
folder.
The SNMP folder expands.
2. From the SNMP folder, select View Table.
The SNMP View Table page is displayed. See Figure 88 on page 234.
In the Action column of the table, click Delete for the View table entry
that you want to remove.