Samsung SPH-M390ZSAVMU - Manual (Page 93)

Settings 89
Change Lock Code
The Lock Code is used to lock the phone, and to
access some phone settings.
1.
From the Main screen, press the
MENU/OK Key ➔ Tools+Settings ➔
Settings
➔ Reset/Delete.
2.
Enter the Lock Code at the prompt. The
default lock code is the last four digits of
the telephone number assigned to your
phone.
3.
Select Change Lock Code.
4.
Follow the prompts to enter the current
lock code and create a new lock code.
Others
Configure other settings.
Abbreviated Dialing
With Abbreviated Dialing, you can call numbers
by dialing just the unique numbers in the
telephone number, and your phone fills in the
other digits. For example, if many numbers you
dial have the same area code, you can configure
Abbreviated Dialing with the area code, then just
dial the remaining digits to place a call.
Abbreviated Dialing will add the configured digits
before the number to complete the number.
1.
From the Main screen, press the
MENU/OK Key ➔ Tools+Settings ➔
Settings
➔ Others ➔ Abbreviated Dialing.
2.
Use the Navigation Key to highlight On
to enable Abbreviated Dialing, or Off, then
press the
MENU/OK Key.
3.
When you set Abbreviated Dialing to On,
continue to enter the digits for abbreviated
dialing. Digits you enter here are dialed
before (prepended to) digits you dial on the
keypad. Press DONE to save your settings.