Samsung SPH-M820ZKABST - Manual (Page 74)

60 2C. Settings
Sound Settings
General Sound Settings
Silent Mode
Use the Silent mode setting when you want to stop the
phone from making any noise. In this mode, the
speaker is muted and the phone only vibrates to notify
you of incoming calls, or other functions that normally
have a defined tone or sound as an alert.
To activate Silent Mode:
ᮣ Press and hold the volume button down in standby
mode until you see
display on the screen.
– or –
Press > and tap > Sound >
Silent mode .
To deactivate Silent Mode:
ᮣ Press the volume button up repeatedly to select a
volume level.
Vibrate
To set your device to vibrate for incoming calls and
silent for notifications:
1. Press > and tap > Sound .
2. Tap Vibrate .
3. Set a vibration mode:
Ⅲ Always : your device vibrates for all incoming calls
and notifications.
Ⅲ Never : your device uses sound only for all
notifications and alerts.
Ⅲ Only in silent mode : your device vibrates for
notifications and alerts when Silent mode is
active.
Ⅲ Only when not in Silent mode : your device only
vibrates for notifications and alerts when Silent
mode is not active.
Note: The Phone vibrate setting is independent of other call
sound settings. For example, if you enable Silent mode
with Phone vibrate, your phone will not play a ringtone,
but will vibrate for an incoming call.
SPH-M820UM.book Page 60 Monday, May 2, 2011 4:56 PM