Horner APG RCS SmartStix - Manual (Page 9)

CH.1 15 MAR 2003 PAGE 9
MAN0305-04
CHAPTER 1: INTRODUCTION
1.1
Scope
The Mini Hardware User Manual provides information about the following products:
a. MiniOCS
(HE500OCSxxx)
MiniRCS (HE500RCSxxx)
The specifications, installation, and configuration procedures of the Operator Control Station (OCS) and
the Remote Control Station (RCS) are covered in detail in this user manual. Information is also provided
for the use of the products in CsCAN and DeviceNet Networks.
Note: Mini data sheets are now located in their own manual. (Refer to Additional References on page
18).
b. SmartStix Modules for CsCAN Networks
(HE550xxxxxx).
SmartStix is a family of remote products for the OCS. This manual covers programming information for
SmartStix used in CsCAN networks.
Figure 1.1 - Front View of MiniOCS (Shown on Door in Panel Box)
1.2
MiniOCS and MiniRCS Product Description
1.2.1
Functions and Features
The MiniOCS provides controller, I/O, operator interface, and optional networking capabilities in one unit.
The MiniRCS has the same functionality as the MiniOCS except that it does not have local operator
interface capabilities. Both the MiniRCS and the MiniOCS support a remote operator interface through a
PC connected to the Mini unit’s built-in network or serial port. The remote operator interface (Remote
Text Terminal) is particularly useful when using the MiniRCS, which does not have a physical front panel
screen or keypad.
The MiniOCS is mounted in a panel door; the MiniRCS is designed for backplate mounting. Both the
MiniOCS and the MiniRCS can be used in CsCAN or DeviceNet networks. To use the MiniRCS in a
DeviceNet network, a DeviceNet file can be downloaded from Cscape’s Firmware Update Wizard.