Horner APG RCS SmartStix - Manual (Page 23)

CH.2 15 MAR 2003 PAGE 23
MAN0305-04
2.2.3
MiniRCS Mounting Orientation
There are NO orientation restrictions on the MiniRCS. However, the orientation shown provides for the
ease of use of the keypad.
2.3
Factors Affecting Panel Layout Design and Clearances
The designer of a panel layout needs to assess the requirements of a particular system and to consider
the following design factors. A convenient checklist is provided on page 25.
Figure 2.10 – Back view of MiniOCS (Shown On Panel Door)
Note: Consider the length
of the Ground Screw extension
when determining clearances.
Ground
strap
Warning: It is important to follow the requirements of the panel manufacturer and to follow
applicable electrical codes and standards.