Red Lion MDC - Manual (Page 15)

USER SETPOINTS MODULE
The User Setpoints Module is accessed
from any of the Indication Displays, or
from any of the main menus in the
Programming Module (except Operating
Mode Menu), by pressing the SET key.
Pressing “SET” once enters the
Setpoint Scroll Menu. In this menu, the
current speed or ratio setpoint may be
incremented or decremented using the Up
and Down arrow keys. The top line of the
display shows the current setpoint value
and the bottom line shows actual speed in
display units.
Pressing “SET” a second time enters the
User Setpoints Menu. The top line shows
the Setpoint description and the bottom
line shows the Setpoint value. The up and
down arrow keys may be used to scroll
through the loop. Pressing the SEL key
allows the value to be changed in a Value
Edit Menu. Press ESC to exit the User
Setpoints Module.
The following flowchart shows only the
User Setpoints portion:
-13-
S Note: These maximums are
additionally limited by unit
scaling. See individual
descriptions for details.