Red Lion MDC - Manual (Page 10)

NORMAL OPERATING MODE
When the MDC is powered up, it is in the Normal Operating
Mode with the Indication Display Module viewed. The up and
down arrow keys are used to scroll through the Indication
Displays. The Indication Displays are referenced as 1 to 4 with
the factory default settings of 1 (SPEED), 2 (OPERATING
STATUS), 3 (ALARM STATUS), and 4 (TRIM). The Indication
Displays can be programmed to show other parameters and
automatically scroll if desired (See Program Displays Menu for
details). All Dedicated Function Inputs, User Inputs, and Alarm
Outputs are operational in the Normal Operating Mode.
From the Normal Operating Mode, two other modules may be
entered. The SET key enters the User Setpoints Module and the
PGM key enters the Programming Module. The last display
viewed when exiting the Indication Display Module will be the
first display viewed upon return. Also, the last Indication Display
viewed at power down, will be the one viewed on power up.
The User Setpoints Module may be accessed from any of the
Indication Displays or from the Programming Module (with the
exception of the Operating Mode Selection Menu). The
Setpoints Module is used to set all of the user setpoints, such as
speed, alarm, and gain values (see Programming User
Setpoints). User Setpoints may be edited while the MDC is in a
RUN or JOG mode.
The flowchart at right shows the three main Modules that are
accessible in the Normal Operating Mode.
-8-