HP TopTools for Hubs and Switches - Manual (Page 186)

14-6
Setting Up Security for a Device
Hub Port Security
All of the features of HP TopTools for Hubs & Switches should now work
correctly for all devices, with the following exceptions:
1. The topology of some older devices may not display correctly.
2. The Update Firmware... option may not work.
3. The Closeup View for devices J3100A, J3125A, J3175A, and J3177A cannot
be invoked.
4. The SNMP Trap Configuration option in the Devices page will not work.
To work around numbers 1, 2, and 4 above, keep the “public” community name
for these devices, specifying “read” capability. Add security for the devices
(except J3125A, J3126A, and J3233A) by specifying an Authorized Manager for
each device.
N o t e 1 Hubs and bridges with the following model numbers: J2355A, J2410A, J2413A,
J2415A, J2600A, J2601A/B, J2602A/B, J2610A/B, J2611A/B, J2612A, J2630A,
J2631A, J2632A, 28692A, 28674B, 28682A, 28688A/B, 28699A, 28673A, 28674A
N o t e 2 Hubs with the following model numbers: J3200A, J3202A, J3204A, J3301A,
J3303A
N o t e 3 Switches with the following model numbers: J3100A/B, J3245A, J3175A,
J3177A, J3298A, J3299A, J4110A, J4120A, J4121A, J4122A
Hub Port Security
You can assign security levels on hubs port by port. Select the Port Security
button to view the current settings for each port.