HP TopTools for Hubs and Switches - Manual (Page 148)

12-8
Accessing Hub Features
Configuring Your Device
If the device you selected is not manageable by browser, you can only manage
it from the HP TopTools Management Workstation. To obtain generic SNMP
information about non-HP devices, select
Properties from the Actions button
menu. To establish a telnet session to this device (if the device supports
telnet), select
Telnet from the Actions button menu.
Figure 12-6. Hub Device View
You can enable and disable individual ports (click on the port to select it), or
click on the
Select All Ports button to enable or disable all the ports of a device
in one step.
Click on the link “ meaning behind the port icons” above the Device View to view
the port indicator legend.
Fault Detection
The automatic fault detection feature protects your network from failing
because of problems such as network loops, defective cables, transceivers
and faulty network interface cards. The Fault Detection page lets you set the
sensitivity and actions that occur when a fault is detected on a port in your
network. For hubs, you can set the sensitivity for logging network problems
and disabling ports. The sensitivity settings are:
High Sensitivity: The device will act when a network problem of any severity
occurs. Network problems are automatically detected and entered into the
Alert Log.