HP MPX200 Multifunction Router - Manual (Page 76)

Product Name MPX200
Symbolic Name Blade-1
Target Presentation Mode Manual
LUN Mapping Enabled
Controller LUN AutoMap Disabled
Target Access Control Enabled
Time To Target Device Offline 0
Serial Number 0906E00039
HW Version 20694-03
SW Version 3.3.2.0rc2c
Boot Loader Version 0.97.0.4
BIOS Version 6.0.0.5
No. of FC Ports 4
No. of iSCSI Ports 2
Log Level 0
Telnet Enabled
SSH Enabled
FTP Enabled
Temp (Front/Rear/CPU1/CPU2) 40C/27C/34C/29C
Uptime 0Days12Hrs8Mins20Secs
show targets
Authority
None
Syntax
show targets {fc | scsi}
Keywords
fc specifies the display of Fibre Channel targets.
iscsi specifies the display of iSCSI targets.
Examples
MPX200 <1> #> show targets fc
Target Information
--------------------
WWNN 20:00:00:14:c3:3d:d2:bf
WWPN 22:00:00:14:c3:3d:d2:bf
Port ID 01-02-31
State Online
WWNN 20:00:00:14:c3:44:9b:86
WWPN 22:00:00:14:c3:44:9b:86
Port ID 01-02-32
State Online
WWNN 20:00:00:14:c3:44:9b:9d
WWPN 22:00:00:14:c3:44:9b:9d
Port ID 01-02-33
State Online
WWNN 20:00:00:14:c3:44:9a:fa
WWPN 22:00:00:14:c3:44:9a:fa
Port ID 01-02-34
State Online
The following example shows the show targets iscsi command:
76 Command reference