HP MPX200 Multifunction Router - Manual (Page 109)

Read only Access
Alias for the iSCSI initiator. Description
qsrIsInitAddressType
InetAddressType Syntax
Read only Access
Type of iSCSI initiator’s IP address (IPv4 or IPv6). Description
qsrIsInitAddress
InetAddress Syntax
Read only Access
IP address of the iSCSI initiator. Description
qsrIsInitStatus
INTEGER Syntax
1 = unknown
2 = loggedIn
3 = loggedOut
4 = recovery
Read only Access
Status of the iSCSI initiator: whether or not it is logged in to the router. Description
qsrIsInitOsType
SnmpAdminString Syntax
Read only Access
The type of the iSCSI initiator’s operating system. Description
qsrIsInitChapEnabled
Integer : 0 = enabled; 2 = disabled Syntax
Read only Access
A value indicating whether CHAP is enabled or not for this iSCSI initiator. Description
LUN table
This table contains information about the logical unit number (LUN) list.
qsrLunTable
SEQUENCE OF QsrLunEntry Syntax
Not accessible Access
A list of the LUNs on the Fibre Channel targets discovered by the router. There are as many
entries in this table as there are Fibre Channel targets on the router. Description
qsrLunEntry
QsrLunEntry Syntax
Not accessible Access
Each entry (row) contains information about a specific LUN. This table extends
scsiDscLunTable
in QLOGIC-SCSI-MIB. The entries in this table show other attributes of
the LUN.
Description
Management Information Base 109