HP MPX200 Multifunction Router - Manual (Page 43)

Syntax
set chap
Example
MPX200 <1> (admin) #> set chap
A list of attributes with formatting and current values will follow. Enter a
new value or simply press the ENTER key to accept the current value. If you
wish to terminate this process before reaching the end of the list press 'q' or
'Q' and the ENTER key to do so.
Index iSCSI Name
----- ----------
0 iqn.2004-08.com.qlogic:MPX200:test.0
1 iqn.2004-08.com.qlogic:MPX200:test.1
2 iqn.1991-05.com.microsoft:qlogic-09sd5i4l
3 iqn.2004-08.com.qlogic:MPX200:test.0.20000014c3449afa.22000014c3449
afa
Please select a presented target from the list above ('q' to quit): 2
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value. If
you wish to terminate this process before reaching the end of the list press
'q' or 'Q' and the ENTER key to do so.
CHAP (0=Enable, 1=Disable) [Disabled] 0
CHAP Secret (Max = 100 characters) [ ] ****
All attribute values for that have been changed will now be saved.
set chassis
Sets the chassis name.
Authority
Admin session
Syntax
set chassis
Example
MPX200 <1> (admin) #> set chassis
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Chassis Name (Max = 64 characters) [ ] rack 14
All attribute values that have been changed will now be saved.
set event notification
Sets the system notification on or off, and specifies the URL to notify.
Authority
Admin session
set chassis 43