HP MPX200 Multifunction Router - Manual (Page 25)

All attribute values that have been changed will now be saved.
image
Updates the router’s firmware image and cleans up (removes) the image files in the router’s /var/
ftp
directory.
Authority
Admin session
Syntax
image {cleanup | list [] | unpack []}
Keywords
cleanup removes all firmware image files in the router’s /var/ftp directory. These are files
transferred by the user when updating the router’s firmware image.
list {} lists the firmware image files in the router’s /var/ftp directory.
unpack {} unpacks the firmware image file specified in the parameter and installs
the firmware image on the router. Prior to using this command, you must transfer the firmware
image file to the router’s /var/ftp directory using FTP. To activate the new firmware, you must
reboot the router.
Examples
The following example shows the image cleanup command:
MPX200 <1> (admin) #> image cleanup
The following example shows the image list command:
MPX200 <1> (admin) #> image list
Image Location Image File
-------------- ----------
Blade 1 (local) mpx-200-3_0_0_5.bin
The following example shows the image unpack command:
MPX200 <1> (admin) #> image unpack MPX200-2_0_0_1.bin
Unpack Completed. Please reboot the system for FW to take effect.
MPX200 <1> (admin) #> reboot
Are you sure you want to reboot the System (y/n): y
System will now be rebooted...
initiator
Adds, modifies, and removes an initiator in the router’s database.
Authority
Admin session
Syntax
initiator {add | mod | remove}
image 25