HP MPX200 Multifunction Router - Manual (Page 20)

migration_group | migration_logs | migration_luninfo |
migration_params | migration_usage | migration_perf}
show array
show compare_luns
show dml
show migration
show migration_group
show migration_logs [] []
show migration_luninfo
show migration_params
show migration_usage
show migration_perf
Enterprise License Server Command Set:
======================================
Server Command Set:
===================
lic_server [ enable | disable | add_client | remove_client
add_feature_key | rem_lic_ports ]
show [ lic_server | lic_server_clients
lic_server_client_info | lic_server_licensed_ports
lic_server_feature_keys | lic_server_trans_logs []
lic_server_recovery_info ]
Client Command Set:
===================
lic_client [ enable | disable | check_in | check_out | sync ]
show [ lic_client | lic_client_recovery_info ]
Data Scrubbing Command Set:
===========================
scrub_lun [ add | acknowledg
history
Lists numerically the previously entered commands.
Authority
None
Syntax
history
Example
MPX200 <1> (admin) #> history
1: admin start
2: help
3: history
MPX200 <1> (admin) #>
host
Creates, modifies, or deletes a host, initiator ports on the host, or LUN map to the host.
Authority
admin
Syntax
host {add | add_lunmask | add_port | mod | rm | rm_lunmask | rm_port}
Keywords
add adds a new host
20 Command reference