HP MPX200 Multifunction Router - Manual (Page 66)

FC Loss of Signal Error Count (LossSgnl),
FC Primitive Sequence Protocol Error Count (PSPErr)
FC Invalid Transmission Word Count (TXWrdErr)
Current Date 12/21/2011
The following examples show the show portstats gige command:
MPX200 <1> #> show portstats gige 1 mins 10
This will display monitoring statistics of GE Port 1 for last 10 minute(s).
Statistics are displayed in reverse order.
If the router has been rebooted recently, the statistics are displayed
starting from the last reboot.
The statistics contain:
Current Date (once) at start, Time Stamp (TimeStamp),
TX bytes (TxByte), RX bytes (RxByte),
TX packets (TxPkt), RX packets (RxPkt),
Maximum round trip time (MaxRTT), Minimum round trip time (MinRTT),
TCP retransmitted packets (ReTxPkt),
Number of TCP Connection drops (ConnDrop)
Current Date 12/21/2011
TimeStamp TxByte RxByte TxPkt RxPkt MaxRTT MinRTT ReTxPkt ConnDrop
--------- ------ ------ ----- ----- ------ ------ ------- --------
11:47:48 104K 104K 606 606 36 32 0 0
11:46:48 104K 104K 606 606 40 32 0 0
11:45:48 104K 104K 606 606 36 32 0 0
11:44:48 103K 103K 606 605 36 32 0 0
11:43:48 103K 103K 604 604 36 32 0 0
11:42:48 103K 103K 603 603 36 32 0 0
11:41:48 103K 103K 606 603 36 32 0 0
11:40:48 103K 103K 607 603 40 32 0 0
11:39:48 103K 103K 606 604 36 32 0 0
11:38:48 104K 104K 612 608 36 32 0 0
MPX200 <1> #> show portstats gige 1 hours 2
This will display monitoring statistics of GE Port 1 for last 2 hour(s).
Statistics are displayed in reverse order.
If the router has been rebooted recently, the statistics are displayed
starting from the last reboot.
The statistics contain:
Current Date (once) at start, Time Stamp (TimeStamp),
TX bytes (TxByte), RX bytes (RxByte),
TX packets (TxPkt), RX packets (RxPkt),
Maximum round trip time (MaxRTT), Minimum round trip time (MinRTT),
TCP retransmitted packets (ReTxPkt),
Number of TCP Connection drops (ConnDrop)
Current Date 12/21/2011
TimeStamp TxByte RxByte TxPkt RxPkt MaxRTT MinRTT ReTxPkt ConnDrop
--------- ------ ------ ----- ----- ------ ------ ------- --------
13:04:48 5M 6M 28K 33K 40 0 0 0
12:04:48 5M 6M 30K 34K 40 0 0 0
show presented targets
Displays targets presented by the router: Fibre Channel, iSCSI, or both.
66 Command reference