HP MPX200 Multifunction Router - Manual (Page 67)

Authority
None
Syntax
show presented_targets {fc | iscsi}
Keywords
fc specifies the display of Fibre Channel presented targets.
iscsi specifies the display of iSCSI presented targets.
Examples
MPX200 <1> #> show presented_targets fc
Presented Target Information
------------------------------
FC/FCOE Presented Targets
----------------------
WWPN 21:04:00:c0:dd:13:ae:b8
WWNN 20:04:00:c0:dd:13:ae:b8
Port ID 00-00-00
Port FCOE1
WWPN 20:23:00:02:ac:00:0e:41
WWNN 2f:f7:00:02:ac:00:0e:41
Port ID 00-00-00
VPGroup 1
WWPN 21:05:00:c0:dd:13:ae:b8
WWNN 20:05:00:c0:dd:13:ae:b8
Port ID cd-00-09
Port FCOE1
WWPN 50:05:08:b4:00:b4:78:c8
WWNN 50:05:08:b4:00:b4:78:c0
Port ID 05-49-00
VPGroup 1
WWPN 21:04:00:c0:dd:13:ae:b9
WWNN 20:04:00:c0:dd:13:ae:b9
Port ID 07-18-02
Port FCOE2
WWPN 50:05:08:b4:00:b4:78:cc
WWNN 50:05:08:b4:00:b4:78:c0
Port ID 05-69-00
VPGroup 1
The following example shows the show presented_targets iscsi command:
MPX200 <1> #> show presented_targets iscsi
Presented Target Information
------------------------------
show presented targets 67