HP MPX200 Multifunction Router - Manual (Page 106)

Read only Access
IP address type: ipv4 or ipv6. Description
qsrIPAddress
InetAddress Syntax
Read only Access
IP address of the port. Description
qsrNetMask
InetAddress Syntax
Read only Access
Subnet mask for this port. Description
qsrGateway
InetAddress Syntax
Read only Access
Gateway for this port. Description
qsrMacAddress
IMacAddress Syntax
Read only Access
MAC address for this port. Description
qstNwLinkStatus
QsrLinkStatus Syntax
Read only Access
Operational link status for this port. Description
qsrNwLinkRate
QsrLinkRate Syntax
Read only Access
Operational link rate for this port. Description
Fibre Channel port table
This table contains a list of the FC ports on the router. There are as many entries in this table as
there are Fibre Channel ports on the router.
qsrFcPortTable
SEQUENCE OF QsrFcPortEntry Syntax
Not accessible Access
A list of the Fibre Channel ports on the router. The table contains as many entries as there are
Fibre Channel ports on the router. Description
qsrFcPortEntry
QsrFcPortEntry Syntax
Not accessible Access
Each entry (row) contains information about a specific Fibre Channel port. Description
106 Simple Network Management Protocol