HP MPX200 Multifunction Router - Manual (Page 37)

0 21:00:00:1b:32:94:e2:8c 21:00:00:18:62:6f:d7:7c
Please select a remote mapping from the list above ('q' to quit): 0
All attribute values that have been changed will now be saved.
remote peers
Allows you to assign up to four router peers to a local router.
Authority
Admin session
Syntax
remotepeer {add | mod | rm}
Keywords
add creates a peer router.
mod allows you to modify the iSCSI connections for a remote system peer router.
rm deletes a peer router.
Examples
MPX200 <1> (admin) #> remotepeer add
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
PEER MGMT port address (IPv4 or IPv6) [0.0.0.0] 172.35.14.61
Contacting PEER system (timeout=120 seconds) ...
password of PEER system: ******
password confirmed.
Remote System Information
-------------------------
Product Name MPX200
Symbolic Name Blade-1
Serial Number 1102F00214
No. of iSCSI Ports 2
iSCSI Base Name iqn.2004-08.com.qlogic:MPX200.1051f00328.b1
Mgmt IPv4 Address 172.35.14.61
iSCSI Port 1 IPv4 Address 40.40.40.61
iSCSI Port 1 IPv6 Link-Local fe80::2c0:ddff:fe1e:a740
iSCSI Port 2 IPv4 Address 20.20.20.178
iSCSI Port 2 IPv6 Link-Local fe80::2c0:ddff:fe1e:a741
iSCSI Port 3 IPv6 Link-Local fe80::2c0:ddff:fe1e:a742
iSCSI Port 4 IPv6 Link-Local fe80::2c0:ddff:fe1e:a743
Please select an ISCSI IP Address from REMOTE system above(IPv4 or IPv6)
[0.0.0.0 ] 40.40.40.61
iSCSI Port 1 IPv4 Address 40.40.40.61
iSCSI Port 1 IPv6 Link-Local fe80::2c0:ddff:fe1e:a790
iSCSI Port 2 IPv4 Address 20.20.20.177
iSCSI Port 2 IPv6 Link-Local fe80::2c0:ddff:fe1e:a791
iSCSI Port 3 IPv6 Link-Local fe80::2c0:ddff:fe1e:a792
iSCSI Port 4 IPv6 Link-Local fe80::2c0:ddff:fe1e:a793
Please select an ISCSI IP Address from LOCAL system above(IPv4 or IPv6)
remote peers 37