HP MPX200 Multifunction Router - Manual (Page 21)

NOTE: If you attempt to add as a host, a host that already has active LUN presentations, the
command fails with an error.
add_lunmask adds a LUN map to the host.
add_port Adds one or more initiator ports to the host. All LUNs that are already presented to
the host (that is, the other initiator ports of the host) are also automatically presented to the new
initiator ports.
mod modifies a host.
rm Removes a host and (optionally) the host’s initiators from the system. If any LUNs were presented
to the host ports that were part of the host, a warning message advises that those LUNs will be
unpresented. If you do not delete the initiators, ports remain available on the system and visible
by issuing the show initiators command.
rm_lunmask removes LUN mapping from the host.
rm_port removes one or more initiator ports from a logged out host. If any LUNs were presented
to the initiator when it was a part of the host, the LUNs are unpresented. To remove the initiator
port from the system, issue the initiator rm command.
Examples
The following example shows the host add command:
MPX200 <1> (admin) #> host add
Enter Symbolic Name: Test-Host-Entity
OS Type (0=Windows, 1=Linux, 2=Solaris,
3=OpenVMS, 4=VMWare, 5=Mac OS X,
6=Windows2008, 7=HP-UX, 8=AIX,
9=Windows2012, 10=Other) [Windows ]
Do you want to add initiators to this Host Entity? (yes/no) [Yes]:
1) Add new initiator 2) Add existing initiator : 2
Local Initiators:
Index Type Mapped (WWNN,WWPN/iSCSI Name)
----- ---- ------ ----------------------
0 FC No 50:05:07:68:02:00:13:47,50:05:07:68:02:20:13:47
1 FC No 50:05:07:68:02:00:13:46,50:05:07:68:02:20:13:46
2 FC No 50:05:07:68:02:00:13:05,50:05:07:68:02:40:13:05
3 FC No 50:01:10:a0:00:17:60:65,50:01:10:a0:00:17:60:64
4 FC No 20:00:00:c0:dd:13:17:3f,21:00:00:c0:dd:13:17:3f
5 FC No 20:00:00:c0:dd:13:17:35,21:00:00:c0:dd:13:17:35
Peer Initiators:
Index Type Mapped (WWNN,WWPN/iSCSI Name)
----- ---- ------ ----------------------
6 FC No 50:05:07:68:02:00:13:47,50:05:07:68:02:20:13:47
7 FC No 50:05:07:68:02:00:13:46,50:05:07:68:02:20:13:46
8 FC No 50:05:07:68:02:00:13:05,50:05:07:68:02:40:13:05
9 FC No 50:01:10:a0:00:17:60:65,50:01:10:a0:00:17:60:64
10 FC No 20:00:00:c0:dd:13:17:3f,21:00:00:c0:dd:13:17:3f
11 FC No 20:00:00:c0:dd:13:17:35,21:00:00:c0:dd:13:17:35
Please select an Initiator ('q' to quit): 3
Do you want to add more initiator ports? [yes/no] [Yes]:
1) Add new initiator 2) Add existing initiator : 1
host 21