HP MPX200 Multifunction Router - Manual (Page 26)

Keywords
add adds an initiator to the router’s database.
mod modifies the settings of an initiator.
rm removes a logged-out initiator. You cannot remove an initiator that is currently logged in.
Examples
MPX200 <1> (admin) #> initiator add
A list of attributes with formatting and current values will follow. Enter a
new value or simply press the ENTER key to accept the current value. If you
wish to terminate this process before reaching the end of the list press 'q' or
'Q' and the ENTER key to do so.
Initiator Protocol (0=ISCSI, 1=FC) [ISCSI ]
Only valid iSCSI name characters will be accepted. Valid characters include
lower-case alphabetical (a-z), numerical (0-9), colon, hyphen, and period.
iSCSI Initiator Name (Max = 223 characters) [ ]
iqn.1991-05.com.microsoft:qlogic-09sd5i4l
OS Type (0=Windows, 1=Linux, 2=Solaris,
3=OpenVMS, 4=VMWare, 5=Mac OS X,
6=Windows2008, 7=HP-UX, 8=AIX,
9=Windows2012, 10=Other) [Windows ] 1
All attribute values that have been changed will now be saved.
The following example shows the initiator mod (modify) command:
MPX200 <1> (admin) #> initiator mod
Index Type (WWNN,WWPN/iSCSI Name)
----- ----- ----------------------
0 FC 50:05:07:68:02:00:13:05,50:05:07:68:02:40:13:05
1 FC 50:05:07:68:02:00:13:47,50:05:07:68:02:20:13:47
2 FC 50:05:07:68:02:00:13:46,50:05:07:68:02:20:13:46
3 FC 50:01:10:a0:00:17:60:67,50:01:10:a0:00:17:60:66
4 FC 50:01:10:a0:00:17:60:65,50:01:10:a0:00:17:60:64
5 FC 20:00:00:c0:dd:13:17:35,21:00:00:c0:dd:13:17:35
6 ISCSI iqn.qlogic.com
Please select an Initiator from the list above ('q' to quit): 6
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
OS Type (0=Windows, 1=Linux, 2=Solaris,
3=OpenVMS, 4=VMWare, 5=Mac OS X,
6=Windows2008, 7=HP-UX, 8=AIX,
9=Windows2012, 10=Other) [Linux ]
All attribute values for that have been changed will now be saved.
The following example shows the initiator rm (remove) command:
MPX200 <1> (admin) #> initiator rm
Warning: This command will cause the removal of all mappings and maskings
associated with the initiator that is selected. All connections
involving the selected initiator will be dropped.
Index Type Status (WWNN,WWPN/iSCSI Name)
26 Command reference