HP MPX200 Multifunction Router - Manual (Page 28)

TCP Port No. [3260 ]
Outbound Port (1=GE1, 2=GE2, ...) [GE1 ]
iSCSI Logout for selected target was successful
The following example shows the iscsi login command:
MPX200 <1> #> iscsi login
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
Index (WWNN,WWPN/iSCSI Name)
----- ----------------------
0 iqn.2001-05.com.equallogic:0-8a0906-0aca53601-cd01c5a39984d7dc-isr6152-lun-3
Please select a Target from the list above ('q' to quit): 0
Index IP Address
----- ----------
0 20.20.20.2
Please select a IP Address from the list above ('q' to quit): 0
TCP Port No. [3260 ]
Outbound Port (1=GE1, 2=GE2, ...) [GE1 ]
Header Digest (0=Enable, 1=Disable) [Disabled ]
Data Digest (0=Enable, 1=Disable) [Disabled ]
iSCSI Login for selected target was successful
logout
Exits the CLI and returns you to the login prompt.
Authority
None
Syntax
logout
Example
MPX200 <1> (admin) #> logout
(none) login:
LUN iSCSI global map
Maps an iSCSI LUN to an initiator, or removes an iSCSI LUN mapping from an initiator.
Authority
Admin session
Syntax
lunigmap {add | rm}
Keywords
add maps a iSCSI LUN to an initiator using global mapping.
28 Command reference