HP StorageWorks Enterprise File Services WAN Accelerator - Manual (Page 70)

70 2 - C ONFIGURING THE HP EFS WAN A CCELERATOR
3. Click the Peering Rules in the left menu to display the Setup: Advanced
Networking - Peering Rules page.
Figure 2-26. Setup: Advanced Networking - Peering Rules Page
4. Under Add New Rule, select Auto, Accept, or Pass from the Type drop-down list.
5. Select start, end, or a rule number from the Insert Rule At drop-down list to
insert a rule in the Rules list. When you specify a particular rule number, the rule
is placed after the rule number you specified and before the default auto-discovery
rule.
6. Type the IP address for the source subnet in the Source Subnet text box. Use the
following format: 0.0.0.0/0.
7. Type the IP address, port, or port label in the Destination Subnet and Port text
boxes. To specify all ports, type all in the Port text box.
8. Type the IP address for the peer appliance in the Peer IP text box.
9. Click Save to write your settings to memory or click Reset to return the settings to
their previous values.
TIP: To remove a peer rule, click the check box next to the name and click Remove Selected
Entries. This action applies the settings to the running configuration. Click Save to write your
settings to memory or click Reset to return the settings to their previous values.