HP StorageWorks Enterprise File Services WAN Accelerator - Manual (Page 123)

HP S TORAGE W ORKS EFS WAN A CCELERATOR M ANAGEMENT C ONSOLE U SER G UIDE 123
2 -
C
ON
FIG
URING
TH
E
HP
EF
S
WA
N
A
C
C
EL
ER
ATO
R
To import a
configuration 1. Click the Setup tab to display the Setup: Optimization Service - General Settings
page.
2. Click Configuration Manager in the left menu to display the Setup: Configuration
Manager page.
Figure 2-57. Setup: Configuration Manager Page
3. Under Import Configuration From, type the IP address or host name of the HP EFS
WAN Accelerator from which you want to import the configuration in the
Appliance IP/Hostname text box.
4. Type the password for the remote HP EFS WAN Accelerator in the Remote
Admin Password text box.
5. Type the name of the configuration you want to import from the remote HP EFS
WAN Accelerator in the Remote Config Name text box.
6. Type a new, local, configuration name for this HP EFS WAN Accelerator in the
New Config Name text box.
7. Optionally, uncheck Import Shared Data Only to import all of the configuration
settings for the remote HP EFS WAN Accelerator.
Keep Import Shared Data Only checked to copy only the following common
settings: in-path and out-of-path interface, protocols, CLI and Web, statistics,
NTP, SNMP, and alarm settings. The following settings are not automatically
copied: failover, SNMP (contact and location), log, and network settings.
8. Click Import Configuration to import the configuration settings to the HP EFS
WAN Accelerator.
The imported configuration appears in the Configuration list.