HP StorageWorks Enterprise File Services WAN Accelerator - Manual (Page 192)

192 A - HP EFS WAN A CCELERATOR M ANAGER C OMMAND -L INE I NTERFACE
Syntax snmp-server {host traps traps
version }
Example minna (config) # snmp-server host minna version 2c ReaDonLy
minna (config) #
snmp-server location
Description Sets the SNMP server location. The no command option disables the SNMP server
location.
Syntax snmp-server location
Parameters
Example minna (config) # snmp-server location “San Francisco”
minna (config) #
Radius and TACACS+ Commands
This section describes the Remote Authentication Dial-In User Service (RADIUS) and
Terminal Access Controller Access Control System (TACACS+) commands. It
contains the following commands:
‹ “aaa authentication login default,” next
‹ “aaa authorization map default-user” on page 193
‹ “aaa authorization map order” on page 193
‹ “radius-server host” on page 194
‹ “radius-server key” on page 195
‹ “radius-server retransmit” on page 196
‹ “radius-server timeout” on page 196
‹ “show radius” on page 196
‹ “show tacacs” on page 196
‹ “tacacs-server host” on page 197
host address> Specifies the host name or IP address for the SNMP server.
traps
Sets the SNMP trap on a community.
traps version
Specifies the SNMP trap version number and community name.
Specifies the location of the system.