Enable, Exit, Secure shell server commands – HP StorageWorks Enterprise File Services WAN Accelerator User Manual
Page 167: Ssh server enable

HP EFS WAN A
CCELERATOR
M
ANAGER
U
SER
’
S
G
UIDE
167
A - HP
EFS W
A
N
A
C
C
EL
ER
ATO
R
M
ANA
GER
Parameters
None
Example
minna # disable
minna >
enable
Description
Enters privileged-mode.
Syntax
enable
Parameters
None
Example
minna > enable
minna #
exit
Description
Exits the CLI when in non-privileged-mode; exits privileged mode when in privileged
mode; exits configuration-mode when in configuration mode.
Syntax
exit
Parameters
None
Example
minna (config) # exit
minna #
Secure Shell Server Commands
This sections describes the Secure Shell (ssh) server commands for the HP EFS WAN
Accelerator Manager. It contains the following commands:
“ssh server enable” on page 167
“ssh client generate identity user” on page 168
“ssh client user authorized-key rsakey sshv2” on page 168
“ssh server listen enable” on page 169
“ssh server listen interface” on page 169
ssh server enable
Description
Enables an ssh server. The no command option disables the ssh server. If the ssh
server is disabled, the CLI is only accessible over the serial console. Note that this