Snmp commands, Show snmp, Snmp-server community – HP StorageWorks Enterprise File Services WAN Accelerator User Manual
Page 190

190
A - HP EFS WAN A
CCELERATOR
M
ANAGER
C
OMMAND
-L
INE
I
NTERFACE
Syntax
show email
Parameters
None
Example
minna # show email
Mail hub:
Domain: example.com (default)
Event emails
Enabled: yes
No recipients configured.
Failure emails
Enabled: yes
No recipients configured.
Autosupport emails
Enabled: yes
recipient:[email protected]
Mail hub:autosupport.example.com
SNMP Commands
This section describes the Simple Network Mail Protocol (SNMP) commands. It
contains the following commands:
next
“snmp-server community” on page 190
“snmp-server contact” on page 191
“snmp-server enable” on page 191
“snmp-server host” on page 191
“snmp-server location” on page 192
show snmp
Description
Displays current Simple Network Management Protocol (SNMP) server settings.
Syntax
show snmp
Parameters
None
Example
minna # show snmp
SNMP enabled: yes
System location:
System contact:
Read-only community: public
Traps enabled: yes
No trap sinks configured.
snmp-server community
Description
Configures the community string required to make SNMP queries. The no command
option disables an SNMP community string to make SNMP queries.