HP StorageWorks Enterprise File Services WAN Accelerator - Manual (Page 174)

174 A - HP EFS WAN A CCELERATOR M ANAGER C OMMAND -L INE I NTERFACE
ntp server
Description Configures an NTP server. The no command option removes an NTP server.
Syntax ntp server [version ]
Parameters
Example minna (config) # ntp server 10.10.10.1
minna (config) #
show clock
Description Displays current date and time.
Syntax show clock
Parameters None
Example minna # show clock
Time: 19:31:43
Date: 2003/12/22
Zone: GMT-offset GMT
show ntp
Description Displays NTP information.
Syntax show ntp
Parameters None
Example minna # show ntp
NTP enabled: yes
No NTP peers configured.
NTP server: 192.6.38.0 (version 4)
NTP server: 66.187.224.1 (version 4)
NTP server: 66.187.233.1 (version 4)
Network Interface Commands
The following section describes the interface commands for the HP EFS WAN
Accelerator Manager. It contains the following commands:
‹ “interface,” next
Specifies the NTP server to synchronize with.
version Specifies the version number for NTP. You do not need to specify the
version number for the no ntp server command.