Table 8 switch data window fields, 8 switch data window fields – HP 8.20q Fibre Channel Switch User Manual
Page 48

48
The Switch data window fields are described in
.
Table 8
Switch data window fields
Field
Description
Summary Group
Switch Type
Switch model
First Port Address
Switch Fibre Channel address
World Wide Name
Switch world wide name
Serial Number
Number assigned to each chassis.
Reason for Status
The reason for the operational state.
Vendor
Switch manufacturer
MAC Address
Media Access Control address
Negotiated Domain ID
The domain ID currently being used by the fabric
Configured Domain ID
The domain ID, defined by network administrator
Domain ID Lock
Domain ID lock status. Prevents (True) or permits (False)
dynamic domain ID reassignment.
Number of Ports
Number of physical ports on the switch
Operational State
Switch operational state: Online, Offline, Diagnostic, Down
Administrative State
Current switch administrative state
Configured Admin State
Administrative state that is stored in the switch configuration
Beacon Status
Beacon status. Switch LEDs are blinking (On) or not blinking
(Off).
Status Group
Operational State
Switch operational state: Online, Offline, Diagnostic, Down
Administrative State
Current switch administrative state
Configured Admin State
Administrative state that is stored in the switch configuration
Beacon Status
Beacon status. Switch LEDs are blinking (On) or not blinking
(Off).
Reason for Status
The reason for the operational state.
Temperature
Internal switch temperature °C
Fan 1 Status
Fan 1 status (dual-power supply model only)
Fan 2 Status
Fan 2 status (dual-power supply model only)
Power Supply 1 Status
Power supply 1 status
Power Supply 2 Status
Power supply 2 status (dual-power supply model only)
Temperature Failure Port
Shutdown
Non-configurable (always enabled for this switch). All ports
are shut down when the switch temperature exceeds the
Failure Temperature.
Warning Temperature
Non-configurable temperature threshold, above which a
warning condition alarm is generated.
Failure Temperature
Non-configurable temperature threshold, above which a
failure condition alarm is generated.