Opening quicktools, Figure 1 add a new fabric dialog box, Figure 2 password change required dialog box – HP 8.20q Fibre Channel Switch User Manual
Page 10: 1 add a new fabric dialog box, 2 password change required dialog box

10
Opening QuickTools
Once the switch is operational, open the QuickTools web applet.
To open the QuickTools web applet:
1.
In an Internet browser, enter the switch IP address (the default switch IP address is 10.0.0.1). (If your
workstation does not have the Java 2 Run Time Environment program, you will be prompted to
download it.)
2.
The Add a New Fabric dialog box (
) prompts you for your username (the default is admin) and
password (the default is password).
Figure 1
Add a New Fabric dialog box
3.
Click Add Fabric to open the fabric. (If you do not have a secure Ethernet connection, the Non Secure
Connection Check dialog box will prompt you to establish a non-secure connection.)
4.
The opening window is displayed (
). For security reasons, you will be prompted to change your
user account password that was initially set up by the administrator (
).
Figure 2
Password Change Required dialog box
NOTE:
Until you change the default password, you will be prompted to change the password each time
you attempt to open the fabric.
5.
Click OK, and change the user account password. See ”
” (page 54) for more
information.