Setting quicktools preferences, Figure 6 preferences dialog box–quicktools, 6 preferences dialog box–quicktools – HP 8.20q Fibre Channel Switch User Manual
Page 17

HP SN6000 Fibre Channel Switch QuickTools Switch Management User Guide
17
Setting QuickTools preferences
Using the preferences settings, you can:
•
Change the location of the working directory in which to save files.
•
Change the location of the browser used to view the online Help.
•
Select the Display Dialog When Making Non-secure Connections option. If this option is enabled, the
Non-secure Connections Check dialog box appears when you attempt to open a non-secure fabric and
you have the option of opening the non-secure fabric. If this option is disabled, you cannot open a
fabric that has a non-secure connection.
•
Enable (default) or disable the Event Browser. See ”
” (page 27) for more information. If
the Event Browser is enabled using the Preferences dialog box (
), the next time QuickTools is
started all events appear. If the Event Browser is disabled when QuickTools is started and enabled later,
only those events from the time the Event Browser was enabled and forward appear.
•
Choose the default port view when opening the faceplate display. You can set the faceplate to reflect
the current port type (default), speed, port operational state, or port transceiver media. Regardless of
the default port view you choose, you can change the port view in the faceplate display by opening the
View menu and selecting a different port view option. See the corresponding subsection for more
information:
•
•
•
•
Figure 6
Preferences dialog box–QuickTools
To set preferences for your QuickTools sessions:
1.
Select File > Preferences to open the Preferences dialog box.
2.
Enter or browse for paths to the working directory and browser.
3.
Choose the preferences you want in the Application-wide Options area.
4.
Click OK to save the changes.