beautypg.com

HP 8.20q Fibre Channel Switch User Manual

Page 25

background image

HP SN6000 Fibre Channel Switch QuickTools Switch Management User Guide

25

5.

In the Remote Fabric Zoning dialog (

Figure 9

), if you made and saved changes in the TR Mapping

Manager dialog, you can choose the type of zoning commands to view in the Suggested Remote

Fabric Zoning Commands window of the Remote Fabric Zoning dialog.
Choose one of the following options from Select Set of Zoning Commands to View:
• The Comprehensive Zoning Commands for Initial TR Setup option to show the list of zoning

commands to set up all the IFZs.

• The Zoning Commands Only for Changes to TR Mappings option to show the list of zoning

commands only for changes you just made during this session (after opening the TR Mapping

Manager dialog).

NOTE:

The Remote Fabric Zoning dialog displays the Select Set of Zoning Commands to View option

only if you made and saved changes in the TR Mapping Manager dialog. If you opened the Remote

Fabric Zoning dialog after selecting File > Generate Remote Zoning, the Select Set of Zoning Commands to

View option is not displayed, and the Suggested Remote Fabric Zoning Commands window displays the

list of zoning commands to set up all the IFZs.

6.

Choose one of the following options from the Remote Switch Type drop-down list to generate the

corresponding zoning commands:
• B-series—to connect remotely with B-series switches
• C-series—to connect remotely with C-series switches

7.

Enter the Configuration Name, which is used as the zone set name in the commands. This must be the

same zone set name as the zone set on the remote fabric to which this zoning will be applied, or else

the commands generated can be saved and edited to change the zone set name as needed. The

default Configuration Name displayed is TRoutesCfg.

8.

Select one of the following:
• Clear the New Configuration option if the remote fabric has an active zone set. Executing the

updated zoning commands on the remote fabric automatically adds the changes to the already

active zone set, provided that the Configuration Name entered is the same as the name of that

active zone set.

NOTE:

If the commands are run and the Configuration Name is not the name of the active zone

set in the remote fabric, the commands attempt to replace the active zone set with a new zone set

with the new name, containing only the Inter Fabric Zones. This will not succeed unless you respond

to CLI queries to accept activation of this new zone set.

• Select the New Configuration option if the remote fabric does not have an active zone set.

Executing the commands on the remote fabric automatically adds the commands (inter-fabric zones)

to create and activate the zone set. The Configuration Name entered is the name of the active zone

set that is created.

9.

Click Export and select a path name (TXT file extension only) in the Save dialog.

Selecting the same path name will overwrite the first path name.

10.

Click Save to save the zoning commands text file on your workstation.

NOTE:

The commands generated for C-series switches assume that zoning will be applied to

VSAN 1. If this is not the correct VSAN, you must edit the commands accordingly before executing

the commands.

This manual is related to the following products: