beautypg.com

HP 8.20q Fibre Channel Switch User Manual

Page 111

background image

HP SN6000 Fibre Channel Switch QuickTools Switch Management User Guide 111

Maintenance mode Formerly known as force PROM mode. Sets the IP address to 10.0.0.1 and provides access to

the switch for maintenance purposes.

Management

Information Base

A set of guidelines and definitions for SNMP functions. See SNMP.

Management

workstation

PC workstation that manages the fabric through the fabric management switch.

MIB

Management Information Base

NDCLA

Nondisruptive Code Load and Activation

NL_Port

Node Loop Port. A Fibre Channel device port that supports arbitrated loop protocol.

N_Port

Node Port. A Fibre Channel device port in a point-to-point or fabric connection.

NDP

Neighborhood Discovery Protocol

NPIV

N_Port ID Virtualization

NTP

Network Time Protocol

Orphan zone set

Zones that are currently not in a zone set are considered to be part of the orphan zone set. The

orphan zone set is not an actual zone set, but rather a way of displaying the zones that are not

currently in a zone set.

OUI

Organizationally Unique Identifier or company ID

Pending firmware

The firmware image that will be activated upon the next switch reset.

POST

Power On Self Test

Power On Self Test

(POST)

Diagnostics that the switch performs at start up.

Principal switch

The switch in the fabric that manages domain ID assignments.

QuickTools

Switch management web applet.

RSCN

Registered State Change Notifications

SCM

SAN Connection Manager

SFP

Small Form-Factor Pluggable

Small Form-Factor

Pluggable

A transceiver device, smaller than a GigaBit Interface Converter, that plugs into the Fibre

Channel port.

SNMP

Simple Network Management Protocol

Soft zone

Soft zoning divides the fabric for purposes of controlling discovery. Members of the same soft

zone automatically discover and communicate freely with all other members of the same zone.

SSH

Secure Shell

SSJ

Secure Sockets Layer

Stack

A group of switches connected by their high speed stacking ports. QuickTools auto-detects

switches connected by their 10 Gb/s or 20 Gb/s ports and displays these stacked switches as

a single stack entity in the faceplate display

This manual is related to the following products: