HP 3PAR System Reporter Software - Manual (Page 283)

9.11 Configuring Adaptive Optimization
System Reporter 2.8 3PAR System Reporter User’s Guide
3 Choose a domain.
4 Choose the CPG that is to be monitored and optimized for each tier. Up to 3 tiers may be
defined.
5 Enter the amount of storage space (in GiBs) to make available for the tier.
6 Schedule when the optimization is to occur. You can specify the date/day of the week and
hour to mitigate impact on system performance by having the optimization run at off-peak
hours. Hold the CTRL key to add multiple selections.
7 Enter the measurement in hours that the sampling for optimization will take place.
8 Select the appropriate mode. Cost/Balanced/Performance.
9 Choose whether the configuration is to be currently active (true/false). This switch allows
you to turn the optimization off and on as required.
10 When done, click Submit Query. An alert window appears confirming that Adaptive
Optimization configuration has been added.
11 Click OK to return to the Sampling Policies window.
9.3.7 Changing an Adaptive Optimization Configuration
To change an Adaptive Optimization configuration:
1 From the Adaptive Optimization Configuration window, click Change next to the
configuration that you want to change.
The Change Adaptive Optimization Configuration window appears.
2 Make the necessary changes.
3 When done, click Submit Query. An alert window appears confirming that the Adaptive
Optimization has been changed.
4 Click OK to return to the Sampling Policies window.
NOTE: When you add a new InServ to be sampled, the system, its domains and
the CPGs that are available may not appear until after the CPG space data has
been sampled for that system.