HP 3PAR System Reporter Software - Manual (Page 200)

8.8 Report Options
3PAR System Reporter User’s Guide System Reporter 2.8
Disk
Compares selected disk magazine position. This value is only available for the
pd_space_time report.
8.4.2.2 example:
The following example specifies that all logical disks are compared:
8.4.3 comparesel
When the compare option (see compare on page 8.5) is used, up to 16 objects can be
compared. However, if there are more than 16 objects selected, then the comparesel option is
used to select a metric. The16 objects with the highest peak values of the metric are chosen to
be compared.
8.4.3.1 values:
Specify one of the following to choose the peak metric:
total_iops
(Default) The total (read + write) IOPs for the object.
total_kbps
The total (read + write) bandwidth (KBytes/s) for the object.
total_svctms
The total (read + write) service time in millisec for the object.
total_qlen
The total queue length for the object.
busy_pct
The percentage of time that the object is busy (i.e., has at least one outstanding operation).
cpu_busy
The percentage of CPU busy time.
&compare=LD