HP 3PAR System Reporter Software - Manual (Page 231)

8.39 Report Options
System Reporter 2.8 3PAR System Reporter User’s Guide
8.4.36 selpdstate
Use the selpdstate option to select physical disks according to their state ( valid or Not
valid ).
8.4.36.1 values:
Specify one or more of the following:
--All PD States--
(Default). PDs are not excluded based on their state.
valid
Specify this value to include all valid physical disks.
Not valid
Specify this value to include only physical disks that do not have a state of valid . For this
value, an escape sequence may be required to retain spacing (for example,
“ Not%20valid ”).
8.4.36.2 example:
The following example shows two ways to specify that physical disks are not to be excluded
based on their states:
The following example specifies that only physical disks with a current state of Not valid
should be used:
8.4.37 selporttype
Use the selporttype option to select ports according to their type.
8.4.37.1 values:
Specify one or more of the following:
&selpdstate=
OR
&selpdstate=--All%20PD%20States--
&selpdstate= Not%20valid