HP XP P9500 Storage - Manual (Page 94)

Figure 52 Execute Panel Showing Normal End
.
When the operation is complete, the Execute panel displays the result. If an error occurred, the Error
information panel opens automatically to display the error. See “
Error Codes and Messages ” on page
150 for further information on errors.
To cancel the operation in progress, click Cancel.
Figure 53 Execute Panel Showing Canceled Operation
.
If an error occurred, the Error information panel opens automatically to display the error). If there is
an error during execution the panel in
Figure 54 on page 94 will be displayed. You should check
that your parameters have been entered correctly and try executing the command again. See Chapter
7 on page 149 for further information on errors.
Figure 54 Execute Panel Showing Error End
.
NOTE:
FCU does not load the next operation automatically. To perform another Data Exchange operation,
select the desired Parameter-Load command, and repeat steps (8) through (12) as shown in “
File
Conversion Utility Window ” on page 87. To exit FCU, select the File-Exit command.
Error Information Dialog
The View-Error information… command opens the Error Information panel, which displays the most
recent error information (error code and message) for FCU, FAL, and system errors.
Using the Data Exchange Software 94