HP XP P9500 Storage - Manual (Page 82)

1. At the UNIX command line prompt, enter: fcu [-nc] [param]
The -nc option (nc = no checking) tells FCU to execute all specified Data Exchange operations
without requesting confirmation for FCU parameters or checking for existing FXmto target files.
To bypass these confirmations, enter -nc.
The param option tells FCU whether to use the FCU parameter definition file or a specific FCU
initiation parameter set to perform Data Exchange operations. The param option must have one
of the following three values:
• [blank]. To use the default FCU parameter definition file (fcudata.param in the current
directory), leave the param option blank (do not enter anything).
• file_name. To use a different FCU parameter definition file, enter the file name with complete
path (absolute or relative) if not in the current directory.
• -P + parameters. To perform one specific Data Exchange operation, enter -P followed
by the FCU initiation parameter set (for example, mto VSN:dataset targetfile No
No No
) for the desired Data Exchange operation. The -P option requires the -nc option.
For example:
• To use the default FCU parameter definition file and check the parameters and FXmto target
files, enter: fcu
• To use the default FCU parameter definition file and perform all operations without checking
parameters or FXmto target files, enter: fcu -nc
• To use a different FCU parameter definition file and perform all operations without checking
parameters or FXmto target files, enter: fcu -nc filename
• To perform one specific Data Exchange operation, enter: fcu -nc -P [parameters]
NOTE:
The following warnings may appear during FCU startup. These warnings do not affect FCU
and can be ignored.
WARNING: Missing characters in String to FontSet conversion.
WARNING: Cannot convert string “-dt-interface
system-medium-r-normal -m*-*-*-*-*-*-*-*-*” to type FontSet.
2. The FCU GUI program now starts loading. The FCU version and copyright screen (see Figure
40 on page 82) is displayed while FCU is loading. When FCU is finished loading, the FCU main
panel is displayed.
3. If you specified the -nc option, FCU processes all specified operations, overwrites existing mto
target files, terminates, and displays any error information at the UNIX prompt.
Figure 40 FCU Version and Copyright Screen (UNIX)
.
Using the Data Exchange Software 82