HP XP P9500 Storage - Manual (Page 151)

Recommended Actions Error Message and Description Error Code
Check the RF type using the MF-File list
command in the FCU Help menu or the
VTOC dump data on the mainframe host. DATASET_ERROR_RECFM_NOT_SUPPORTED
The record format is not supported.
-12
Make sure that the VTOC and dataset were
created correctly on the mainframe host.
DATASET_ERROR_INVALID_DATA
The data in the VTOC or the dataset is invalid.
-13*
Make sure that the Data Exchange volume
definition file was created correctly.
DATASET_ERROR_VOLUME_DEFINITION_INVALID
The format of volume definition file is invalid.
-14*
Make sure that the datasetOpen function
is called before the datasetGet function.
DATASET_ERROR_DATASET_NOT_OPENED
An attempt was made to read the dataset without opening it.
-15
Make sure the requirements and restrictions
specified in
Chapter 6 on page 123 are met.
For example:
Dataset open and close must be used as a
pair.
More than one dataset cannot be open
within one process.
datasetOpen ,
datasetGetFileInformation , and
datasetFindFirstFile cannot be used
while the dataset is being accessed by
datasetGetFileInformation
or
datasetFindFirstFile .
datasetGetFileInformation and
datasetFindFirstFile cannot be used
while the dataset is being accessed
datasetOpen
.
DATASET_ERROR_DATASET_NOT_CLOSED
An attempt was made to open the dataset without closing it first.
-16
Make sure that the buffer area is larger than
the dataset record length.
DATASET_ERROR_BUFLEN_SHORT
The buffer length specified by datasetGet is shorter than the
actual record length. -17
Make sure that volume initialization is
complete and correct on the mainframe
host. This error occurs when a system that
does not support large files accesses a
formatted volume from a system that sup-
ports large files. This error also occurs when
a data partition size is incorrect for Solaris.
DATASET_ERROR_VOLUME_LABEL_INVALID
No standard volume label was found, or the contents of the VTOC
are illegal. -18*
Make sure that the VTOC was created cor-
rectly on the mainframe host.
DATASET_ERROR_VTOC_INVALID
No VTOC found or the contents of the VTOC are invalid.
-19*
Make sure that the specified volume has
been entered correctly in the Data Ex-
change volume definition file. DATASET_ERROR_VOLUME_NOT_DEFINED
The specified volume is not defined.
-20*
HP StorageWorks P9000 Data Exchange User Guide 151