Execute panel showing normal end – HP XP P9500 Storage User Manual
Page 118
11.
When FCU starts the operation, the Execute panel opens and displays the progress of the
operation. To cancel the operation in progress, click Cancel.
NOTE:
The Execute panel will not appear when the mainframe OS is VSE.
12.
When the operation is complete, the Execute panel displays the result. If an error occurred, the
Error information panel opens automatically to display the error. See “
” on page 150 for further information on errors.
13.
FCU does not load the next operation automatically. To perform another Data Exchange operation,
select the desired Parameter-Load command, and repeat steps (8) through (12). To exit FCU,
select the File-Exit command.
NOTE:
After an FXotm file transfer from Windows systems, there will be a delay before you can access the
Data Exchange volume. The length of delay varies according to individual server performance.
NOTE:
After you expand open volumes (LUSE), you will need to reboot Windows systems.
NOTE:
Do not use the open-system host to access a Data Exchange volume. Use only FAL to access Data
Exchange volumes. This applies to PC server platforms (for example, NT) and UNIX-based systems.
NOTE:
The Cancel button changes to Close after the operation ends abnormally.
Figure 73 Execute Panel Showing Normal End
.
Performing Data Exchange Operations
118