HP XP P9500 Storage - Manual (Page 51)

NOTE:
There is no guarantee that Data Exchange will correctly access your data without meeting these
requirements.
Table 28 Support and OS Conditions
Data Exchange Ver-
sion
Storage System OS Version
01–03–59 and later XP24000/XP20000 or XP12000/XP10000 disk array VSE2.5 and later
When you use MTO and OTM for the dataset allocated by VSE 2.3, you must specify the RF , RL and
BL by using the correct VSE parameters.
When you use MTO and OTM for the dataset allocated by VSE 2.5, Data Exchange can transfer
data without a VSE parameter.
Table 29 Support Matrix for VSE OS, VSE Parameter and Record Format
Record Format 1 VSE Parameter OS and Data
Exchange Ver-
sion VB V FB F
Available Available Available Available Yes VSE 2.3 and
earlier
(Data Exchange
01-xx-58 and
earlier)
Not available Not available Not available Not available No
Available
3
Available
2 Available Available Yes VSE 2.5 and
later
(Data Exchange
01-03-59 and
later)
Available
5
Available
4 Available Available No
1 Legend:
F: Fixed non-block length
FB: Fixed block length
V: Variable non-block length
VB: Variable block length
2 It is possible to transfer data between correct dataset attribute (5 RL BL 4). The data transfer is
valid only if the VSE parameters are as shown:
RL 32756
BL 32760
BL=RL+4
For the following dataset attributes, the data transfer is invalid if user does not specify the VSE
parameter value as shown above.
RL>32756
HP StorageWorks P9000 Data Exchange User Guide 51