HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 96)

Command line 96
Item Description
->show statistics -summary LAGID=enc0:1:lag25
Displays aggregated statistics with selected counters for a given LAG ID on
interconnect module 1 of the primary enclosure
->show statistics LAGID=enc0:1:lag25
Displays aggregated statistics for a given LAG ID on interconnect module 1 of the
primary enclosure
In addition to the standard statistics, Virtual Connect also provides additional information on DCBX. DCBX is
the data center discovery and capability exchange protocol used by DCB devices to exchange configuration
information with directly-connected peers. The protocol can also be used for misconfiguration detection and
for configuration of the peer. In this release, the VC module adopts the DCBX specification to implement the
control state machine and three feature state machines:
• Priority Group (PG)
• Priority-based Flow Control (PFC)
• Application Protocol (AP)
The following tables lists the type of DCBX statistics displayed.
Item Description
DCBX Application Protocol State
DCBX Overall Status
DCBX Pending Status
DCBX Priority Flow Control State
DCBX Priority Group State
DCBX Application Protocol State
The following table defines each statistic.
Item Description
disabled The feature is operationally disabled.
ok The feature is configured properly or DCBX negotiation is in progress.
incompatible cnfg A FlexFabric network adapter has an incompatible configuration and is not
accepting changes.
peer_disabled A FlexFabric network adapter reports that the feature is not enabled.
Does not support dcbx A FlexFabric network adapter does not indicate that it supports the feature.
Not advertising dcbx support A FlexFabric network adapter is not running DCBX within the expired
period.
Error during cnfg A FlexFabric network adapter reported an error configuring the feature.
Not accepting changes A FlexFabric network adapter reported an error configuring the feature.
statistics-throughput
Manage the port throughput statistics.
Supported actions: help, show, set