HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 48)

Command line 48
Item Description
->set iscsi-boot-param MyProfile1:1 BootOrder=Primary
ISCSIBootParamDHCP=Enabled NetworkParamDHCP=Enabled
DHCPVendorID=SomeVendorIDValue
Configures iSCSI Boot attributes to be retrieved from DHCP
->set iscsi-boot-param MyProfile1:1 -maskSecret
-maskMutualSecret Authentication=CHAPM
Username=SomeUserName MutualUsername=SomeMutualUsername
ISCSIBootParamDHCP=Enabled NetworkParamDHCP=Enabled
DHCPVendorID=SomeVendorIDValue
Configures CHAP secret and CHAPM secret values as a masked string
Item Description
show iscsi-boot-param Display the basic iSCSI boot parameters configured on the specified iSCSI
connection.
Syntax
show iscsi-boot-param []
Parameter
ConnectionID
(optional)
The ID of an existing iSCSI connection. The ID format is .
Use show profile or show iscsi-connection
to display the port number of the iSCSI connection.
Examples
->show iscsi-boot-param MyProfile1:1
Displays boot parameters configured on connection 1 of MyProfile1
->show iscsi-boot-param MyProfile1:*
Displays boot parameters configured on all connections of MyProfile1
->show iscsi-boot-param *
Displays boot parameters configured on all profiles in the domain
iscsi-connection
Manage iSCSI connections.
Supported actions: add, help, remove, set, show
Item Description
add iscsi-connection Add a new iSCSI connection to an existing server VC profile. This command can
be executed only if the current VC domain is managing one or more Flex-10
modules.
Syntax
add iscsi-connection
[Network=]
[AddressType=]
[iScsiMAC=]
[SpeedType=]
[Speed=]
Parameter
ProfileName (required) The name of an existing profile to which the new connection is being added
Properties
Network (optional) The name of an existing network to associate with the connection. If the network
name is not specified or is unassigned, it can be assigned later.