HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 42)

Command line 42
Item Description
->set fcoe-connection MyProfile:1 Fabric=SAN_5
Changes the fabric of an FCoE SAN fabric connection
->set fcoe-connection RedProfile:2 Fabric=""
Sets a FCoE SAN fabric connection to "Unassigned"
->set fcoe-connection MyProfile:1 SpeedType=Custom
CustomSpeed=5000
Modifies the FCoE connection and sets a custom speed of 5Gb
->set fcoe-connection BlueProfile:1 BootPriority=Primary
BootPort=50:06:0B:00:00:C2:62:00 BootLun=5
Changes the SAN boot priority and sets additional boot parameters
Item Description
show fcoe-connection Display the FCoE connections associated with the server profiles.
Syntax
show fcoe-connection []
Parameter
ConnectionID
(optional)
The ID of an existing FCoE connection. The ID format is .
Use to display all FCoE connections of a profile. Use "*" to
display all FCoE connections in the domain.
Examples
->show fcoe-connection
Displays all FCoE connections in the domain
->show fcoe-connection Profile1:*
Displays all FCoE connections of a profile named Profile1
->show fcoe-connection Profile1:1
Displays a specific FCoE connection of a profile named Profile1
firmware
Display the Virtual Connect interconnect module firmware version.
Support actions: help, show
show firmware Display the firmware information for all interconnect modules in the domain.
Syntax
show firmware
Examples
->show firmware
Displays a summary listing of all firmware
->show firmware *
Displays a detailed listing of all firmware
To update firmware, use the HP BladeSystem c-Class Virtual Connect Support Utility. For more information on
installing the firmware, see the HP BladeSystem c-Class Virtual Connect Support Utility documentation on the
HP website (
http://www.hp.com/go/bladesystem/documentation ).