HP Virtual Connect 4Gb Fibre Channel Module for c-Class BladeSystem - Manual (Page 21)

Command line 21
Item Description
->add banner text="This is a private system."
->add banner text=""
->add banner text="Unauthorized access is prohibited."
->add banner text=""
->add banner text="Communications are monitored."
Adds banner text with multiple commands (A blank line is displayed in between
each line of text in this example.)
Item Description
remove banner Remove configured banner text.
Syntax
remove banner
Example
->remove banner
Removes the configured banner text
Item Description
show banner Display the configured banner text.
Syntax
show banner
Example
->show banner
Displays the configured banner text
config
Display all CLI commands for all objects defined in the domain. The show config command is useful for
generating a CLI script that can be used for creating a domain configuration. The generated script is only
valid for the firmware version currently running. A script generated on one version of firmware is unlikely to
be properly executed by a different version of firmware.
Any user- or VC-defined MAC addresses, WWNs, and logical serial numbers will not appear in the output
to avoid duplicating these values.
Supported actions: help, show
Item Description
show config Generate a configuration script from the running domain.
Syntax
show config
Example
->show config
Displays the configuration script for the running domain
configbackup
Manage the domain configuration file.
Supported actions: help, restore, save